Law of Inertia Experiment using a Fidget Spinner! 2


Share with your friends!

In my last post I shared a simple experiment with my son that taught him about Center of Mass. While we were doing the experiment, we were also playing with another physics concept; the Law of Inertia. Inertia is an object’s resistance to change it’s state of motion. For example, if a ball is rolling on a surface with ZERO friction (a force that causes moving things to stop), the inertia of the ball would keep it moving at the same speed forever! But in the real world, we have friction, so the inertia of an object is its resistance to being stopped.

In our center of mass experiment, we discovered removing the lights one at a time affected how the fidget spinner spun. But as we reviewed the videos of each spinner, we also noticed something else changing. That’s when I realized my son was also doing a fidget spinner science experiment about the Law of Inertia!

Fidget Spinner Science Experiment | Inertia Experiment for Kids | Fidget Spinner STEM



Learning about the Law of Inertia with a Fidget Spinner

During our center of mass experiment, we wrote down how long it took for each spinner to stop. We did this by watching the time lapse on the video, and noting when the fidget spinner started and stopped spinning.

Fidget Spinner Science Experiment | Inertia Experiment for Kids | Fidget Spinner STEM




As you can see, when the fidget spinner had three lights in, it spun for over a minute. With two lights in the spinner, it only spun for 30 seconds, and with only one light, it spun for 22 seconds. Once all the lights were removed from the fidget spinner, it only spun for 17 seconds.

If you want to verify my data, please feel free to on my You Tube channel!

The next question I had was why does this happen?

Lets start by looking at the equation for torque, the force my son applied to the fidget spinner to make it spin:

\tau =I\alpha

where \tau is torque
I is inertia of the fidget spinner
\alpha is the angular acceleration, or how much the spinner speeds up or slows down over time

The equation for Inertia is

I=mr^2

where I is inertia
m is mass
r is radius ( the distance from the middle of the fidget spinner to the edge of the fidget spinner

Substituting I in the equation for torque, we now have

\tau=mr^2\alpha

Fidget Spinner Science Experiment | Inertia Experiment for Kids | Fidget Spinner STEM




As I said before, \alpha is how the fidget spinner speeds up or slows down over time. The equation for \alpha is:

\alpha=\frac{[\omega2-\omega1]}{t}

where ω1 is the speed of the spinner when it starts spinning
ω2 is the speed when it stops, so it equals 0
t is the amount of time it takes the fidget spinner to stop

Substituting α in the equation and eliminating ω2 since its equal to 0, we now have

\tau=\frac{mr^2\omega1}{t}

Now, we want to know how the weight (or mass) of the fidget spinner affects the how long it spins. So we want to solve for t.

t=\frac{mr^2[\omega1]}{\tau}



Whoa! That was a lot of math! But we’re just interested in how time (t) relates to mass (m). Looking at our equation above we see that time and mass are directly related, meaning as mass gets bigger, the longer the fidget spinner takes to stop! This is exactly what we saw happen as we removed lights (and therefore weight) from our spinner. The more lights that were in the spinner, the longer it spun!

Try this quick and easy experiment at home using my free guide! Let me know if you get the same results!

Your Fidget Spinner Inertia Experiment Guide!

Subscribe today, and get a step-by-step guide to running this experiment at home!

We won't send you spam. Unsubscribe at any time. Powered by ConvertKit

Experiment with inertia using a Fidget Spinner! Learn what happens to a fidget spinner as you remove weight from it.

Interested in other science activities? Check out some of my other posts!

Center of Mass Fidget Spinner Experiment
How to make a Fidget Spinner
Reverse Engineering a Fidget Spinner

Teach your Kid about Biomechanical Engineering
STEM In the Kitchen
Tinker Crate: Exploring Polymers
Tinker Crate: Circuits and Optics
Teach your kid to be a Materials Engineer
Teach your kid to be a Project Engineer
Teach your kid to be a Reliability Engineer
Teach your kid to be a Mechanical Engineer
Be a Process Engineer: Play “How’s it Made?”
Exploring Energy: How Are Height and Distance Related?

2 thoughts on “Law of Inertia Experiment using a Fidget Spinner!

  • Genesis

    This is awesome! My kids have experimented with changing the weight distribution on their fidget spinners, but it never occurred to me to teach them about inertia at the same time. I guess it’s not something I think much about, but now we’ll be digging those suckers out again. Thanks!

    • From Engineer to SAHM Post author

      We just happened to notice the times changing, and wondered why? Amazing what we can teach our kids with their toys!

Comments are closed.